Plastic-Tags.com E.R. Perry Signs & Engraving LLC

Plastic Tag and Lettering Materials

We predominantly use Rowmark, Innovative Plastics and Scott-Ply materials. They are noted not only for their consistently high quality but also diversity of materials availability sufficient to fulfill most customer's needs. However we are not limited to these when specialty materials are needed to fulfill a custom need or application.

Safe-T-Mark     ** New **

This is a recent addition to the Rowmark line of engravable plastics. It was specifically designed to meet or exceed the electrical conductivity characteristics which made bakelite, a phenolic plastic, a necessity for electrical applications. The advantage to this product is it's ease of production, competitive pricing, and superior physical characteristcs such as flame spread when compared to bakelite. Color availability is limited to typical industrial needs. [Link: Color Chart and Properties ]

Ultra-Matte Front Engravable

This is our standard laminate material used for most plastic engraving jobs. It is heavy duty with a smooth face. There is a reasonable color choice selection. [ Link: Color Chart and Properties ]

Ultra-Matte Reverse Engravable

This is the same plastic engraving material as above except that the face is matte clear and a thin layer of color is on the back. We engraved through the back in reverse and then paint fill the letters or logos. The process is more complicated and time consuming so therefore is more costly. There is a reasonable color choice selection. [ Link: Color Chart and Properties ]

Weatherable Metallics

This is the material we use for gold and silver faced plastic engraving. It is weather hardy and does not scratch as easily as some of the other brands of metallic faced plastics. It has a brushed surface that is not overly shiny so that signs made of this stock read well. There is a reasonable color choice selection. [ Link: Color Chart and Properties ]

Textured Plastic

This material has a textured surface that is “grainy”. It is most commonly used for exterior applications. Color choice selection is somewhat limited. [ Link: Color Chart and Properties ]

Engraving Brass

The brass we use for engraved plates is .020” thick. It has a lacquered face that we engrave through and treat the letters chemically to turn them black. It has a brushed smooth surface. Special order brass material at .040” thickness is available.

Stainless Steel

Stainless Steel that engraves well is limited. There are two plate sizes available to us as well as round tags.

Vinyl

Vinyl replaces painted letters for vehicle lettering, door lettering or reception wall lettering and signage in general. We use 3M premium 220 vinyl which is a top line product and comes in a broad variety of colors. Vinyl is shipped to you ready to install. There are limited vinyl products in our cart at this time. Refer to our information pages for more details.

Contact us directly to meet any needs not found in our website.